5. Configuring FTP communication
6. Configuring HTTP communication
The HTTP protocol can be used to browse or change the settings.
1. Go to Communication > Protocol configuration.
Figure 20 - HTTP server
2. Under HTTP server:
a. Select the checkbox for Enable HTTP server.
b. Change the HTTP server access to Read-only to prevent any unwated
change.
The
default setting here is ReadWrite, which means that any setting can
be read or changed except Logics and Mimic and disturbance records.
IEC 61850 configuration instructions
6. Configuring HTTP communication
26
P3APS19001EN
