| data configuration setting view.
Bit index
For binary GOOSE. Select the right bit out of possible stream. 0
is the first bit (if set to 1, it reads the second bit).
Value
Not a setting but showing actual value when connected.
VAI Unit
For analog GOOSE. Preconfigured. Select the unit of the value
sent by the GOOSE.
Status
Not a setting but showing actual status when connected.
Initial value
For binary GOOSE. Preconfigured to "Last". "Initial" means after
power on or when Ethernet connection is lost.
Set the value according to the requested application
◦
"Last" means last value received is memorized
◦
"Off" means = "0"
◦
"On" means ="1"
In use
Select the In use checkbox for N1.
Supervision group Preconfigured to Group1.
◦
When the GOOSE status is other than "OK", the Global
Supervision group alarm is always raised.
◦
When the GOOSE status is other than "OK", the selected
Supervision group alarm is raised (information to be used in
the Matrix or Logic)
NOTE: The subscruber configuration setting view is slightly different for
analog and binary GOOSE.
Figure 17 - Analog GOOSE subscriber data points
4. GOOSE communication configuration
IEC 61850 configuration instructions
P3APS19001EN
23
Figure 18 - Binary GOOSE subscriber data points
IEC 61850 configuration instructions
4. GOOSE communication configuration
24
P3APS19001EN
Chia sẻ với bạn bè của bạn: | 
