| 4.3. Configuring a device to publish two GOOSE control blocks
MOdify the Application ID parameter in Communication > GOOSE
configuration.
•
GOOSE control blocks (GCBs) with the same MAC address:
◦
The Application ID must be different for both GCB to identify the GOOSE
publisher.
◦
The same Application ID must not be repeated in the other GCBs.
•
GOOSE control blocks with different MAC addresses:
◦
Up to 5 common MAC addresses are recommended in P3.
◦
The same Application ID can be repeated in the other GCBs.
4.4. Configuring a device to subscribe to GOOSE
1. In the Communication > GOOSE configuration > Subscriber
configuration setting view:
a. Select the Enable checkbox.
b. Check that the same MAC Address that is under Publisher
Chia sẻ với bạn bè của bạn: | 
