Khoa hóa họC (141 142 báo cáo)


Transesterification of Basa oil with ethanol on Amberlyst - 15 to evaluate essential fatty acids by GC - MS



tải về 0.78 Mb.
trang32/37
Chuyển đổi dữ liệu24.07.2016
Kích0.78 Mb.
#3323
1   ...   29   30   31   32   33   34   35   36   37

Transesterification of Basa oil with ethanol on Amberlyst - 15 to evaluate essential fatty acids by GC - MS


In the past 2 decades, views about fatty acids from triglycerides have moved from speculation about their functions to solid evidence that they are not only essential nutrients but also may favorably modulate many diseases. Essential fatty acids favorably affect atherosclerosis, coronary heart disease, inflammatory disease, and perhaps even behavioral disorders.

In this research, we focus on evaluating fatty acids of Basa oil by transesterification. Firstly, to prepare for the transesterification reaction, put basa oil in dry box at 60oC in 2 hours. Then, transfer to the round bottomed flask 50,0 ml of ethanol and 8,0 ml of prepared basa fatty oil, the excess alcohol is used to ensure total conversion of the oil to its esters. Adding 1,0 g dry Amberlyst-15 and setting up transesteritication reaction. Keep the temperature in the range of 80oC - 85oC. After 8 hours of reaction, sampling solution was filtered to remove catalyst particles and impurities prior to product extraction. Extracting esters by hexene and then removing hexene by simple distillation. Since Amberlyst-15 is reusable, we leach the catalyst. The separated catalyst sample was exhaustively washed with hexene and dried during 1h at 60oC. The product then is determined by GC-MS.




110. Nghiên cứu xử lý nước thải dệt nhuộm
bằng phương pháp oxi hóa tăng cường sử dụng quang xúc tác
trong vùng ánh sáng khả kiến



Sinh viên: Nguyễn Hữu Huy, K53 Chương trình Tiên tiến

Giáo viên hướng dẫn: PGS.TS. Nguyễn Văn Nội, NCS. Lê Thị Thanh Thúy



Hiện nay sản xuất dệt nhuộm thải ra môi trường một lượng lớn nước thải dệt nhuộm với nhiều loại thành phần khác nhau khó bị phân hủy sinh hóa. Quá trình oxi hóa tăng cường (AOPs) là phương pháp triển vọng trong xử lý dòng nước thải này bằng cách tạo ra gốc tự do OH. có tính oxi hóa mạnh, có thể khoáng hóa hoàn toàn các hợp chất hữu cơ. Một trong những AOPs là sử dụng quang xúc tác với chất nền là TiO2 theo cơ chế tạo ra cặp electron/lỗ trống khi được chiếu xạ. Những tác nhân này phản ứng với oxy, nước hoặc ion OH- trên bề mặt xúc tác tạo ra các gốc tự do. Tuy nhiên, vùng cấm của TiO2 khá lớn (3,2 eV) nghĩa là chúng chỉ hoạt động dưới ánh sáng UV. Vì vậy vấn đề là làm sao kích thích cho xúc tác hoạt động trong vùng khả kiến để tận dụng ánh sáng mặt trời. Điều này được thực hiện bằng cách cấy vào cấu trúc TiO2 một vài cation và anion. Kết quả là vùng cấm của TiO2 bị thu ngắn lại và ngăn cản quá trình tái kết hợp electron/ lỗ trống làm tăng hoạt tính xúc tác. Trong công trình này, Titan dioxit cấy Fe, C, S, N được điều chế bằng phương pháp sol-gel đã phân hủy Rodamin B hoàn toàn trong vùng ánh sáng khả kiến.




Study on treatment of dye chemicals in textile wastewater by advanced oxidation processes using visible light photocatalysts




Nowadays, textile manufacture generates to the environment a large amount of waste water which contains non-biodegradable chemical dyes in highly variable composition. Advanced oxidation processes (AOPs) are promising method for treatment of those waste water effluences. This method produces extremely strong oxidizing agents OH. which can oxidize the pollutants completely to nontoxic inorganic compounds. One of AOPs, photocatalysis mainly bases on the photocatalytic activity of TiO2 that creates electron/hole pairs during irradiation. These charge agents then react with surface oxygen, water or hydroxide ions to produce free radicals. However, the bandgap of TiO2 is so large (3.2 eV) that it is only active in UV radiation which occupies a tiny portion of solar light energy. It is economically necessary to induce the photocatalytic activity of TiO2 to visible light by doping with other cations or anions into original TiO2 structure. Consequently, the synergy of these dopants would reduce the band gap of TiO2 and act as traps to hinder electron/hole pair recombination that results in enhancing TiO2 photocatalytic activity. In this work, TiO2 doped with Fe and C, N, S was synthesized by sol-gel method illustrated high efficiency in decomposing Rhodamine B in visible light.




111. Synthesis of the catalysts for biodiesel production



Sinh viên: Choijilsuren Delgermurun, K53 Chương trình Tiên tiến

Giáo viên hướng dẫn: PGS.TS. Lê Thanh Sơn



The role of the biodiesel industry is not to replace petroleum diesel, but to help create a balanced energy policy with the most benefit to the United States. Biodiesel is one of several alternative fuels designed to extend the usefulness of petroleum, and the longevity and cleanliness of diesel engines. Sulfated stannous oxide is solid super-acid which can be used as catalyst fortransesterification. It was applied to catalyze the crude palm kernel oil and crude coconut oil transesterification. From the results, SO42-/SnO2 shows relatively high activity. Methyl esters content and yield of about 95,4 wt% and 90,3 wt% are obtained in case of crude palm kernel oil, and 88,3 wt% and 80,6 wt% are received in case of crude coconut oil, respectively.

Biodiesel is natural and renewable domestic fuel alternative for diesel engines made from vegetable oils mostly soy and corn, It contains no petroleum and non toxic also biodegrable. Burns clean which results in significant reduction of the types of pollutants that contribute to smog and global warming and emits up to 85% fewer cancer causing agents.



112. Nghiên cứu chế tạo vật liệu hấp phụ Al2O3-CeO2, đánh giá khả năng hấp phụ cation kim loại nặng và anion asenat



Sinh viên: Đỗ Thị Hiền, K53B

Giáo viên hướng dẫn: PGS.TS. Trần Hồng Côn



Đề tài này đã tiến hành thực nghiệm điều chế 5 loại vật liệu Al2O3-CeO2 với tỷ lệ mol tương ứng là 150/1; 100/1; 50/1; 30/1 và 10/1. Các loại vật liệu điều chế được có dạng những tinh thể nhỏ (khoảng 1 mm) nhưng cũng có dạng khối lớn không đều. Nghiên cứu khả năng hấp phụ của các loại vật liệu này cho thấy:

- Khả năng hấp phụ cation kim loại nặng (Mn2+) là rất kém;

- Khả năng hấp phụ anion asenat lại rất tốt;

- Bước đầu cho thấy bề mặt hoạt động của các vật liệu đều có tính ái anion (bề mặt mang hiệu ứng điện tích dương).



tải về 0.78 Mb.

Chia sẻ với bạn bè của bạn:
1   ...   29   30   31   32   33   34   35   36   37




Cơ sở dữ liệu được bảo vệ bởi bản quyền ©hocday.com 2024
được sử dụng cho việc quản lý

    Quê hương