Hình K.4 - Sơ đồ biểu thị các giá trị được cho trong Bảng K.4

[1] ISO 3183, Petroleum and natural gas industries - Steel pipe for pipeline transportation systems

[2] ISO 11960, Petroleum and natural gas industries - steel pipes for use as casing or tubing for wells

[3] ISO/TR 25679, Mechanical testing of metals - Symbols and definitions in published standards

[4] ISO/IEC Guide 98-3, Uncertainty of measurement - Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)

[5] ISO/TTA 2, Tensile tests for discontinuously reinforced metal matrix composites at ambient temperatures

[6] ASTM A370, standard test methods and definitions for mechanical testing of steel products

[7] ASTM E8M, standard test methods for tension testing of metallic materials

[8] ASTM E1012, standard practice for verification of test frame and specimen alignment under tensile and compressive axial force application

[9] CWA 15261-2:2005, Measurement uncertainties in mechanical tests on metallic materials- The evaluation of uncertainties in tensile testing

[10] DIN 50125, Testing of metallic materials - Tensile test pieces

[11] EN 10291, Metallic materials - Uniaxial creep testing in tension - Methods of test

[12] GB/T 228, Metallic materials - Tensile testing at ambient temperature

[13] IACSW2, Test specimens and mechanical testing procedures for materials. In: Requirements concerning materials and welding, pp. W2-1 to W2-10. International Association of Classification Societies, London, 2003. Available (2008-06-26) at: http://www.iacs.org.uk/document/public/publications/unified requirements/pdf/ur w pdf159.pdf

[14] JIS Z2201, Test pieces for tensile test for metallic materials

[15] NIS 80:1994, Guide to the expression of uncertainty in testing

[16] NIS 3003:1995, The expression of uncertainty and confidence in measurement

[17] DEAN, G.D., LOVEDAY, M.S., COOPER, P.M. Aspects of modulus measurement. In: DYSON, B.G., LOVEDAY, M.S., GEE, M.G., editors. Materials metrology and standards for structural performance, pp. 150-209. Chapman & Hall, London, 1995

[18] ROEBUCK, B., LORD, J.D., COOPER, P.M.,. MCCARTNEY, L.N. Data acquisition and analysis of tensile properties for metal matrix composites. J. Test. Eval. 1994, 22(1), pp. 63-69

[19] SONNE, H.M., B. HESSE, B. Determination of Young’s modulus on steel sheet by computerised tensile test - Comparison of different evaluation concepts. In: Proceedings of Werkstoffprüfung [Materials testing] 1993. DVM, Berlin

[20] AEGERTER, J., KELLER, S., WIESER, D. Prüfvorschrift zur Durchführung und Auswertung des Zugversuches für Al-Werkstoffe [Test procedure for the accomplishment and evaluation of the tensile test for aluminium and aluminium alloys], In: Proceedings of Werkstoffprüfung [Materials testing] 2003, pp. 139-150. Stahleisen, Düsseldorf

[21] RIDES, M., LORD, J. TENSTAND final report: Computer-controlled tensile testing according to EN 10002-1: Results of a comparison test programme to validate a proposal for an amendment of the standard. National Physical Laboratory, Teddington, 2005

[22] LORD, J. LOVEDAY, M.S., RIDES, M., MCENTAGGART, I. TENSTAND WP2 final report: Digital tensile software evaluation: Computer-controlled tensile testing machines validation of European standard EN 10002-1. National Physical Laboratory, Teddington, 2005. 68 p.

[23] TAYLOR, B.N., KUYATT, C.E. Guidelines for evaluating and expressing the uncertainty of NIST measurement results. NIST, Gaithersburg, MD, 1994. 25 p. (NIST Technical Note 1297.) Available (2009-07-23) at: http://physics.nist.gov/Pubs/quidelines/TN1297/tn1297s.pdf

[24] LOVEDAY, M.S. Room temperature tensile testing: A method for estimating uncertainty of measurement. National Physical Laboratory, Teddington, 1999. [Measurement note CMMT (MN) 048.] Available (2009-07-23) at: http://publications.npl.co.uk/npl_web/pdf/cmmt_mn48.pdf

[25] BELL, S.A. (1999) A beginner’s guide to uncertainty of measurement, 2nd edition. National Physical Laboratory, Teddington, 2001. 41 p. (Measurement Good Practice Guide, No. 11.) Available (2009-07-31) at: http://publications.npl.co.uk/npl web/pdf/mqpq11.pdf

[26] BIRCH, K. Estimating uncertainties in testing. National Physical Laboratory, Teddington, 2001. (Measurement Good Practice Guide, No. 36.) Available (2009-07-23) at: http://publications.npl.co.uk/npl_web/pdf/mqpq36.pdf

[27] KANDIL, F.A., LORD, J.D., BULLOUGH, C.K., GEORGSSON, P., LEGENDRE, L., MONEY, G., MULLIGAN, E., FRY, A.T., GORLEY, T.A.E., LAWRENCE, K.M. THE UNCERT manual of codes of practice for the determination of uncertainties in mechanical tests on metallic materials [CD-ROM], EC, Brussels

[28] SONNE, H.M., KNAUF, G., SCHMIDT-ZINGES, J. Überlegungen zur Überprüfung von Zugprüfmaschinen mittels Referenzmaterial [Considerations on the examination of course test equipment by means of reference material]. In: Proceedings of Werkstoffprüfung [Materials testing] 1996. Bad Nauheim. DVM, Berlin

[29] INGELBRECHT, C.D., LOVEDAY, M.S. The certification of ambient temperature tensile properties of a reference material for tensile testing according to EN 10002-1: CRM 661. EC, Brussels, 2000. (BCR Report EUR 19589 EN.)

[30] LI, H.-P., ZHOU, X. New Consideration on the uncertainty evaluation with measured values of steel sheet in tensile testing. In: Metallurgical analysis, 12th Annual Conference of Analysis Test of Chinese Society for Metals, 2004

[31] KLINGELHÖFFER, H., LEDWORUSKI, S., BROOKES, S., MAY, T. Computer controlled tensile testing according to EN 10002-1 - Results of a comparison test programme to validate a proposal for an amendment of the standard- Final report of the European project TENSTAND - Work Package 4. Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin, 2005. 44 p. (Forschungsbericht [Technical report] 268.) Available (2008-07-01) at: http://www.bam.de/de/service/publikationen/publikationen_medien/fb268_vt.pdf

[32] LOVEDAY, M.S., GRAY, T., AEGERTER, J. Tensile testing of metallic materials - A review - Final report of the TENSTAND project of work package 1. Bundesanstalt für Materialforschung und - prüfung (BAM), Berlin, 2004

[33] ASTM Research Report E 28 1004:1994, Round robin results of interlaboratory tensile tests

[34] ROESCH, L., COUE, N., VITALI, J., DI FANT, M. Results of an interlaboratory test programme on room temperature tensile properties - Standard deviation of the measured values. (IRSID Report, NDT 93310.)

[35] LOVEDAY, M.S. Towards a tensile reference material. In: LOVEDAY, M.S., GIBBONS, T.B. Harmonisation of testing practice for high temperature materials, pp. 111-153. Elsevier, London

[36] JOHNSON, R.F., MURRAY, J.D. The effect of rate of straining on the 0.2 % proof stress and lower yield stress of steel. In: Proceedings of Symposium on High Temperature Performance of Steels, Eastbourne, 1966. Iron and steel Institute, 1967

[37] GRAY, T.G.F., SHARP, J. Influence of machine type and strain rate interaction in tension testing. In: PAPIRNO, R., WEISS, H.C. Factors that affect the precision of mechanical tests. ASTM, Philadelphia, PA. (Special Technical Publication 1025.)

[38] AEGERTER, J., BLOCHING, H., SONNE, H.-M. Influence of the testing speed on the yield/proof strength - Tensile testing in compliance with EN 10002-1. Materialprüfung 2001, 10, pp. 393-403

[39] AEGERTER, J. Strain rate at a given point of a stress/strain curve in the tensile test [Internal memorandum], VAW Aluminium, Bonn, 2000

[40] BLOCHING, H. Calculation of the necessary crosshead velocity in mm/min for achieving a specified stress rate in MPa/s [Report], Zwick, Ulm, 2000. 8 p.

[41] MCENTEGGART, I., LOHR, R.D. Mechanical testing machine criteria. In: DYSON, B.G., LOVEDAY, M.S., GEE, M.G., editors. Materials metrology and standards for structural performance, pp. 19-33. Chapman & Hall, London, 1995

1⁾ 5,65 = 5 11,3