Nhóm thanh ghi điều khiển
3.3.1.1.Chức năng của thanh ghi
3.4.Giao tiếp với VĐK
Truyền gói 3.4.1.1.Thiết lập việc truyền 3.4.1.2.Tiến trình gởi 3.4.1.3.Trạng thái truyền Nhận gói
Mô hình bus trong mạng CSMA/CD cho phép mỗi nút nhận mọi gói được gởi lên mạng. Bộ lọc nhận sẽ xác định gói nào được phép lưu vào bộ đệm nhận. Không phải mọi gói đều được quan tâm, chỉ có những gói có địa chỉ đích thỏa bộ lọc nhận mới được chuyển vào bộ nhớ. NIC đưa ra một số lựa chọn cho bộ lọc nhận và cách quản lý một gói hoàn chỉnh cho việc lưu trữ gói đang đến.
3.4.1.4.Tiến trình nhận 3.4.1.5.Bộ đệm thu
Chuẩn SPI
The ENC28J60 is designed to interface directly with the Serial Peripheral Interface (SPI) port available on many microcontrollers. The implementation used on this device supports SPI mode 0,0 only. In addition, the SPI port requires that SCK be at Idle in a low state; selectable clock polarity is not supported. Commands and data are sent to the device via the SI pin, with data being clocked in on the rising edge of SCK. Data is driven out by the ENC28J60 on the SO line, on the falling edge of SCK. The CS pin must be
held low while any operation is performed and returned high when finished.
Chia sẻ với bạn bè của bạn: |