2
|
ni.com
|
NI USB-6001/6002/6003 User Guide
Figure 1.
NI USB-6001/6002/6003 Top and Side Views
Safety Guidelines
Operate the NI DAQ device only as described in this document.
Caution
Refer to the NI USB-6001/6002/6003 Safety, Environmental, and
Regulatory Information document included with your kit
for important safety and
electromagnetic compatibility information. To obtain a copy of this document online,
visit
ni.com/manuals
and search for the document title.
Caution
Do not operate the device in a manner not specified in this document.
Misuse of the device can result in a hazard. You can compromise the safety protection
built into the device if the device is damaged in any way. If the device is damaged,
contact National Instruments for repair.
Caution
Do not substitute parts or modify the device except as described in this
document. Use the device only with the chassis, modules, accessories, and cables
specified in the installation instructions.
Caution
Do not operate the device in an explosive atmosphere or where there may
be flammable gases or fumes. If you must operate the device in such an environment,
it must be in a suitably rated enclosure.
Caution
You must have all covers and filler panels installed during operation of the
device. Do not operate the device without verifying that the cover is correctly
attached and the device is completely closed.
1
Screw Terminal Connector Plug
2
LED Indicator
3
Micro-B USB Connector
2
3
1
NI USB-6001/6002/6003 User Guide
|
© National Instruments
|
3
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) stated in the product specifications. These requirements
and limits provide reasonable protection against harmful interference when the product is
operated in the intended operational electromagnetic environment.
This product is intended for use in industrial locations. However, harmful interference may
occur in some installations, when the product is connected to a peripheral device or test object,
or if the product is used in residential or commercial areas. To minimize interference with radio
and television reception and prevent unacceptable performance degradation, install and use this
product in strict accordance with the instructions in the product documentation.
Furthermore, any modifications to the product not expressly approved by National Instruments
could void your authority to operate it under your local regulatory rules.
Caution
To ensure the specified EMC performance, the length of any wire or cable
connected to the screw terminal connector must be no longer than 0.5 m (20 in.).
Unpacking
The NI DAQ device ships in an antistatic package to prevent electrostatic discharge (ESD). ESD
can damage several components on the device.
Caution
Never touch the exposed pins of the connectors.
To avoid ESD damage in handling the device, take the following precautions:
•
Ground yourself with a grounding strap or by touching a grounded object.
•
Touch the antistatic package to a metal part of your computer chassis before removing the
device from the package.
Remove the device from the package and inspect it for loose components or any other signs of
damage. Notify NI if the device appears damaged in any way. Do not install a damaged device
in your computer.
Store the device in the antistatic package when the device is not in use.
Packing List
The NI DAQ device is shipped in a box that contains:
•
NI USB-6001/6002/6003
•
Two screw terminal connector plugs
•
Hi-Speed Micro USB cable
•
NI-DAQmx DVD
•
NI USB-6001/6002/6003 Quick Start document
•
NI USB-6001/6002/6003 Safety, Environmental, and Regulatory Information document
4
|
ni.com
|
NI USB-6001/6002/6003 User Guide
Setting Up the NI USB-6001/6002/6003
Complete the following steps to get started with the NI USB-6001/6002/6003.
Installing the Software
1.
Install the application software (if applicable), as described in the installation instructions
that accompany your software.
2.
Install NI-DAQmx. NI USB-6001/6002/6003 devices are supported by NI-DAQmx 9.9 and
later.
Note
The NI-DAQmx software is included on the disk shipped with your kit and is
available for download at
ni.com/support
. The documentation for NI-DAQmx is
available after installation from Start»All Programs»National Instruments»
NI-DAQmx. Other NI documentation is available at
ni.com/manuals
.
3.
Register your products when the NI Product Registration Wizard appears.
Preparing the Hardware
1.
Insert the screw terminal connector plugs into the connector jacks on the device. Refer to
Figure 2.
2.
The Hi-Speed Micro USB cable has two different connectors. Plug the smaller connector
into the device, and plug the larger connector into the USB port on the computer where
NI-DAQmx is installed.
Figure 2.
Hardware Setup for NI USB-6001/6002/6003
1
Screw Terminal Connector Plugs
2
Hi-Speed Micro USB Cable
1
1
2
NI USB-6001/6002/6003 User Guide
|
© National Instruments
|
5
Verifying the Installation
1.
Complete the following to launch NI Measurement and & Automation Explorer (NI MAX):
•
Chia sẻ với bạn bè của bạn: