Ví dụ:
Console> (enable) set system name 4003-ER-F1
System name set.
4003-ER-F1> (enable) set system location Bldg 1 Equip Room
System location set.
4003-ER-F1> (enable) set system contact sysadmin@bigcorp.com
System contact set.
4003-ER-F1> (enable) set time 04/30/1999 9:45:00
Fri Apr 30 1999, 09:45:00
4003-ER-F1> (enable) set module name 2 Gig Uplinks
Module name set.
4003-ER-F1> (enable) set module name 3 Gig Server Links
Module name set.
4003-ER-F1> (enable) set password
Enter old password:
Enter new password:
Retype new password:
Password changed.
4003-ER-F1> (enable) set enablepass
Enter old password:
Enter new password:
Retype new password:
Password changed.
4003-ER-F1> (enable)
3.7.3 Cấu hình Login Banner
Login banner còn gọi là message of the day, là thông báo sẽ hiện ra trên màn hình khi bắt đầu một phiên Telnet hay Console vào switch Login bannercó thể ghi tối đa 255 ký tự.
Task
|
Command
|
Xác định login banner hay message of the day
|
set banner motd c [text] c
|
Ví dụ:
Console> (enable) set banner motd %
4003-ER-F1 (Catalyst 4003)
Access Restricted
%
MOTD banner set
Console> (enable) exit
Session Disconnected...
Cisco Systems, Inc. Console Thu Apr 30 1999, 16:37:03
4003-ER-F1 (Catalyst 4003)
Access Restricted
Enter password:
3.7.4 Cấu hình DNS
Domain Name System (DNS) cho phép bạn sử dụng hostnames thay cho IP addresses khi truy cập các thiết bị trên hệ thống mạng. Để sử dụng được DNS bạn phải xác định một hay nhiều DNS server trên mạng.
Task
|
Command
|
Step 1 Xác định DNS server address.
|
set ip dns server ip_addr [primary]
|
Step 2 Xác định domain name.
|
set ip dns domain name
|
Step 3 cho phép DNS.
|
set ip dns enable
|
Step 4 Xác nhận cấu hình
|
show ip dns [noalias]
|
Ví dụ:
Console> (enable) set ip dns server 10.10.10.100
10.10.10.100 added to DNS server table as primary server.
Console> (enable) set ip dns domain bigcorp.com
Default DNS domain name set to bigcorp.com
Console> (enable) set ip dns enable
DNS is enabled
Console> (enable) show ip dns
DNS is currently enabled.
The default DNS domain name is: bigcorp.com
DNS name server status
---------------------------------------- -------
dns-server-1.bigcorp.com primary
Console> (enable)
3.7.5 Quản lý file cấu hình
File cấu hình chứa thông tin cấu hình của switch. Bạn thường phải xem cấu hình hiện tại, lưu giữ các cấu hình hiện tại trước khi thay đổi chúng hay cấu hình switch bằng các file cấu hình được được lưu giữ. Phần này sẻ giúp bạn thực hiện các công việc ấy.
Xem cấu hình hiện tại:
Task
|
Command
|
Hiển thị cấu hình hiện tại lên màn hình
|
show config
|
Ví dụ:
Console> (enable) show config
.....
..............
..............
..............
..
begin
!
#version 5.1(1)
!
set password $1$FMFQ$HfZR5DUszVHIRhrz4h6V70
set enablepass $1$FMFQ$HfZR5DUszVHIRhrz4h6V70
set prompt Console>
set length 24 default
set logout 20
set banner motd ^C
4003-ER-F1 (Catalyst 4003)
Access Restricted
^C
<...output truncated...>
end
Console> (enable)
Lưu giữ file cấu hình vào TFTP server:
Task
|
Command
|
Lưu giữ file cấu hình đối với switch 4000.
|
copy config tftp
|
Ví dụ:
Console> (enable) copy config tftp
IP address or name of remote host []? 10.10.10.150
Name of file to copy to []? 4003-ER-F1.cfg
Upload configuration to tftp:4003-ER-F1.cfg, (y/n) [n]? y
.....
..............
..............
..............
..
/
Configuration has been copied successfully.
Console> (enable)
Cấu hình switch bằng file cấu hình từ tftp server (có 2 cách)
Task
|
Command
|
Load cấu hình từ tftp server, cách 1.
|
copy tftp config
|
Load cấu hình từ tftp server, cách 2..
|
configure network
|
Ví dụ:
Console> (enable) copy tftp config
IP address or name of remote host []? 10.10.10.150
Name of file to copy from []? dns_config.cfg
Configure using tftp:dns_config.cfg (y/n) [n]? y
Finished network download. (135 bytes)
>>
>> set ip dns server 10.10.10.100 primary
10.10.10.100 added to DNS server table as primary server.
>> set ip dns enable
DNS is enabled
>> set ip dns domain bigcorp.com
Default DNS domain name set to bigcorp.com
Console> (enable)
3.7.6 Quản lý System Image file.
System image file chính là file chứa IOS của switch, quyết định toàn bộ các tính năng của switch. Ta có thể lưu giữ hay cập nhật system image file khi có yêu cầu.
· Catalyst 4000, 2948G, 2926G, and Supervisor Engine III, III F
Task
|
Command
|
Step 1 Copy system image file từ tftp server.
|
copy tftp flash
|
Step 2 Thay đổi các thông số boot hệ thống
|
set boot system flash file_id prepend
|
Step 3 Để chạy IOS mới, cần phải khởi động lại hệ thống
|
reset system
|
Step 4 Kiểm tra lại IOS.
|
show version
|
Ví dụ:
Console> (enable) copy tftp flash
IP address or name of remote host []? 10.10.10.150
Name of file to copy from []? cat4000.5-1-1.bin
Flash device [bootflash]?
Name of file to copy to [cat4000.5-1-1.bin]?
8784112 bytes available on device bootflash, proceed (y/n) [n]? y
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCC
File has been copied successfully.
Console> (enable) set boot system flash bootflash:cat4000.5-1-1.bin prepend
BOOT variable = bootflash:cat4000.5-1-1.bin,1;bootflash:cat4000.4-4-1.bin,1;
Console> (enable) reset system
This command will reset the system.
Do you want to continue (y/n) [n]? y
1999 Mar 26 22:01:56 %SYS-5-SYS_RESET 0:00.505752: Please set IPAddr variable
0:00.506320: Please set Netmask variable
0:00.506675: Please set Broadcast variable
0:00.507176: Network is not configured
WS-X4012 bootrom version 4.4(1), built on 1998.12.28 10:22:22
H/W Revisions: Meteor: 4 Comet: 8 Board: 2
Supervisor MAC addresses: 00:10:7b:f7:2f:00 through 00:10:7b:f7:32:ff (1024 addresses)
Installed memory: 32 MB
Testing LEDs.... done!
The system will autoboot in 5 seconds.
Type control-C to prevent autobooting.
rommon 1 >
The system will now begin autobooting.
Autobooting image: "bootflash:cat4000.5-1-1.bin"
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCC###########################
Starting Off-line Diagnostics
<...output truncated...>
Cisco Systems, Inc. Console
4003-ER-F1
Access Restricted
Enter password:
Console> show version 1
Mod Port Model Serial # Versions
--- ---- ---------- -------------------- ---------------------------------
1 0 WS-X4012 JAB023806LN Hw : 0.1
Gsp: 5.1(1)
Nmp: 5.1(1)
Console>
· Supervisor Engine II
Task
|
Command
|
Step 1 Copy system image file từ tftp server.
|
download host file
|
Step 2 Reset lại switch
|
reset system
|
Step 3 Kiểm tra lại IOS
|
show version
|
3.7.7 Reset Module hay Switch
Task
|
Command
|
Reset module riêng lẻ
|
reset mod_num
|
Ví dụ
Console> (enable) reset 6
This command will reset module 2 and may disconnect your telnet session.
Do you want to continue (y/n) [n]? y
Resetting module 6...
Console> (enable) 05/30/1999,09:32:05:SYS-5:Module 6 reset from telnet/10.10.10.12/
05/30/1999,10:18:23:SYS-5:Module 6 is online
Console> (enable)
Task
|
Command
|
Reset toàn bộ switch
|
reset
|
Console> (enable) reset
This command will reset the system.
Do you want to continue (y/n) [n]? y
Console> (enable) 05/30/1999,10:24:46:SYS-5:System reset from Console//
System Bootstrap, Version 3.1(2)
Copyright (c) 1994-1997 by cisco Systems, Inc.
<... output truncated ...>
Phần hướng dẫn trên đy chỉ bao gồm các nội dung căn bản, thiết yếu khi cài đặt thiết bị switch Cisco 4000 vao hệ thống mạng. Các thông tin chi tiết về cấu hình hệ thống được trình by trong CD-ROM Documentation của Cisco được đi kèm theo mỗi thiết bị.
|