Bulletin HY14-1450-M1/US
Bul 1450-M1pgs.p65, dd
Flow Control Servovalves
6
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio, USA
Red Wire
(+)
(-)
Black Wire
+ Voltage
to Red Wire
connects P C1 port
Gnd
CSA Wiring
Green Wire
1/2" NPT
76.2
(3.00)
69.9
(2.75)
140.5
(5.53)
159.0
(6.26)
2.3
(0.09)
22.4
(0.88)
20.6
(0.81)
109.7
(4.32)
155.4
(6.12)
180.1
(7.09)
C1
Minimum cable length 18"
Access for
Null Adjust
Pilot
Pressure
Test Port
60.3
(2.375)
92.1
(3.625)
P
C1
R
C2
44.5 (1.75)
Port Circle
15.9 (0.625)
4 Ports
3.3 (0.13)
Locating Pin
3.8 (0.15) Maximum Length
8.4
(0.33)
4
places
Dimensions
Series BD30, CSA Version BD30J*M
Notes: 1. Servovalve mating surface to be flat within 0.002 inch TIR, and smooth to within 63 rms.
2. Servovalve mounting screws are to be torqued to 110-150 in.-lbs., above run down torque.
3. For proper orifice selection
and decal part number, refer to Table 1.
Inch eqivalents for millimeter dimensions are shown in (**)
Chia sẻ với bạn bè của bạn: 
