Bulletin hy14-1450-M1/us installation and Service Guide

Parker Hannifin Corporation

tải về 0.84 Mb.

Chế độ xem pdf

trang	5/19
Chuyển đổi dữ liệu	19.04.2023
Kích	0.84 Mb.
	#54570

1 2 3 4 5 6 7 8 9 ... 19

Bul HY14-1450-M1 BD15-BD30

BD15 Installation Data
Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Dimensions Series BD30 Notes

Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio, USA
Dimensions
Series BD15, ATEX Version BD15N*L
1/2" NPT
11.2
(0.44)
GPM
139.7
(5.50)
120.9
(4.76)
50.3
1.98)
(
12.7
(0.50)
9.9
(0.39)
87.1
3.43)
(
106.4
(4.19)
C1
Minimum cable length 18"
Access for
Null Adjust
Pilot
Pressure
Test Port
81.3
(3.20)
Black #1
(+)
Black #2
More + voltage to Black #1
connects P C2 port
Gnd
ATEX Wiring
(-)
Yellow with Green Stripe
BD15 Installation Data
Mounting Screws, Soc. Hd. Cap
5/16-18 Th x 1.00 long
Torque
110 to 150 in. lbs.
O-ring Grooves
0.560 Dia. x 0.052 deep
O-ring Size
2-013 (70 Durometer)
Elec. Connector Mates with -
MS3106-14S-2S
Notes: 1. Servovalve mating surface to be flat within 0.002 inch TIR, and smooth to within 63 rms.
2. Servovalve mounting screws are to be torqued to 110-150 in.-lbs., above run down torque.
3. For proper orifice selection and decal part number, refer to Table 1.
Inch eqivalents for millimeter dimensions are shown in (**)
8.4 (0.33)
Mounting Holes
4 Places

Flow Control Servovalves
Bulletin HY14-1450-M1/US
Bul 1450-M1pgs.p65, dd
5
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio, USA
Dimensions
Series BD30
Notes: 1. Servovalve mating surface to be flat within
0.002 inch TIR, and smooth to within 63 rms.
2. Servovalve mounting screws are to be torqued to
110-150 in.-lbs., above run down torque.
3. For proper orifice selection and decal part number,
refer to Table 1.

tải về 0.84 Mb.

Chia sẻ với bạn bè của bạn:

1 2 3 4 5 6 7 8 9 ... 19