Connecting Controllers
Connect Controllers to OPC Data Access Server
To connect controllers to the OPC Data Access Server, click the Data Access tab
and follow the steps below:
1.
In the Controller Identity entry field, enter the IP address for an available
controller.
2.
Click Connect to connect the controller.
The controller IP address will now appear in the Connected Controllers list.
To add more controllers, repeat the procedure above.
Connect Controllers to OPC Alarm and Event Server
The OPC Alarm and Event Server gets data from controllers via subscription. When
adding the subscriptions of Alarm and event to a controller, the address of the OPC
Server will be stored in the controller. All Event Notifications from the controller
will be pushed to the OPC Server.
To connect controllers to the OPC Alarm and Event Server, click the Alarm and
Event tab and follow the steps below:
1.
In the Controller Identity entry field, enter the IP address for an available
controller.
2.
Click Connect to connect the controller.
The controller IP address will now appear in the Connected Controllers list.
To add more controllers, repeat the procedure above.
Each of the controllers connected has an icon indicating the current status of the
connection to the controller.
If a controller containing a distributed application (an application that exists in
more than one controller) is connected, all variables in the application is
accessible even if they are owned by another controller. To access the hardware
configuration of the other controller, explicitly connect to that controller.
Each of the controllers connected has an icon indicating the current status of the
connection to the controller.
Alarm and Event Settings
Section 2 Start-up and Configuration
24
3BSE035983-510
Chia sẻ với bạn bè của bạn: |