Phải tiến hành thí nghiệm ngay sau khi lấy mẫu ra khỏi phòng bảo dưỡng để tránh thay đổi độ ẩm và nhiệt độ.
Testing will be carried out right after taking sample out of curing tank to avoid changing humidity and temperature.
Các mẫu đất gia cố sẽ được thử cường độ chịu nén ở độ tuổi 14 ngày và 28 ngày. Phương pháp thử nén dựa theo “Phương pháp xác định cường độ chịu nén trong điều
kiện không hạn chế nở hông ASTM D2166”.
Reinforced soil samples will be tested the compressive strength at: 14 days and 28 days. Compression test method based on "Method of determining the compressive strength of unrestricted conditions unconfined ASTM D2166".
Mẫu được thí nghiệm trên máy nén cho phép xuất các kết quả tính toán cường độ chịu nén qu và modun biến dạng E. Hình 5 đến Hình 6 mô tả các công đoạn chuẩn bị và thực hiện thí nghiệm nén nở hông xác định cường độ nén của mẫu đất trộn xi măng.
Sample was tested on the compressor that allows print out the calculation results of the compressive strength qu and deformation modulus E. Figure 5 and figure 6 describes the preparation and implementation of unconfined compression tests determine the compressive strength of soil-cement samples.
Hình 5. Công tác gia công bề mặt mẫu, cân mẫu cho thí nghiệm nén
Figure 5: Surface planing before compression test
Hình 6. Thí nghiệm nén nở hông trên thiết bị tự động (Marui – Japan).
Figure 6. Unconfine compressive test on auto device
Chia sẻ với bạn bè của bạn: |