Isometer® iso685-d-p iso685W-d-p iso685-s-p iso685w-s-p insulation Monitoring Device with integrated locating current injector for it ac systems with galvanically connected rectifiers and inverters and for it dc systems

tải về 5.18 Mb.

Chế độ xem pdf

trang	73/75
Chuyển đổi dữ liệu	22.08.2023
Kích	5.18 Mb.
	#55079

1 ... 67 68 69 70 71 72 73 74 75

iso685-D-P D00170 M XXEN

18.4 Ordering details * Option W: Increased shock and vibration resistance 3K5, 3M7; -40…+70 °C Insulation fault locators

18.3 Standards and certifications
The ISOMETER® has been developed in compliance with the following standards:
• DIN EN 61557-8 (VDE 0413-8):2015-12
• IEC 61557-8:2014-12
• IEC 61557-8:2014/COR1:2016
• DIN EN 61557-8 Ber 1 (VDE 0413-8 Ber 1):2016-12
• DIN EN 61557-9 (VDE 0413-9):2015-10
• IEC 61557-9:2014-12
Combination of ISOMETER® sensor variant with FP200:
The requirements of Option "W" will only be fulfilled when the ISOMETER®
sensor variant is mounted on DIN rail and connected to the FP200 via the
patch cable.
Refer also to the quick-start guide FP200 (Document number D00169).
18.4 Ordering details
* Option W: Increased shock and vibration resistance 3K5, 3M7; -40…+70 °C
Insulation fault locators
* Absolute values
Type
Supply voltage U
S
Art. No.
iso685-D-P
AC 24…240 V; 50…400 Hz
DC 24…240 V
B91067030
iso685W-D-P*
AC 24…240 V; 50…400 Hz
DC 24…240 V
B91067030W
Combination
iso685-S-P + FP200
AC 24…240 V; 50…400 Hz
DC 24…240 V
B91067230
Combination
iso685W-S-P + FP200W*
AC 24…240 V; 50…400 Hz
DC 24…240 V
B91067230W
Type
Supply voltage U
S
*
Response value
Art. no.
EDS440-S-1
AC/DC 24…240V
2…10mA
B 9108 0201
EDS440W-S-1
AC/DC 24…240V
2…10mA
B 9108 0201W
EDS440-L-4
AC/DC 24…240V
2…10mA
B 9108 0202
EDS440W-L-4
AC/DC 24…240V
2…10mA
B 9108 0202W
EDS441-S-1
AC/DC 24…240V
0,2…1mA
B 9108 0204
EDS441W-S-1
AC/DC 24…240V
0,2…1mA
B 9108 0204W
EDS441-L-4
AC/DC 24…240V
0,2…1mA
B 9108 0205
EDS441W-L-4
AC/DC 24…240V
0,2…1mA
B 9108 0205W
EDS441-LAB-4
AC/DC 24…240V
0,2…1mA
B 9108 0207
EDS441W-LAB-4
AC/DC 24…240V
0,2…1mA
B 9108 0207W

Technical data
Technical data
iso685-D-P_D00170_03_M_XXEN/07.2017
87
Accessories
* included in the scope of delivery
** If the “transparent front cover 144x72 (IP65)” is used, the cutout in the control cabinet
must be increased in height from 66 mm to 68 mm (+ 0.7 / -0 mm).
Description
Art. No.
iso685 mechanical accessories comprising:
terminal cover and 2 mounting clips*
B91067903
iso685 plug kit, screw terminals*
B91067901
iso685 plug kit, with push-wire terminals
B91067902
Transparent cover 144x72 (IP65) for FP200 **
B 98060005
BB bus 6TE connector
(Necessary for the connection of the ISOMETER®s with an
EDS44…-L)
B98110001

tải về 5.18 Mb.

Chia sẻ với bạn bè của bạn:

1 ... 67 68 69 70 71 72 73 74 75