E Trouble Shooting
When the CT-T1 instrument is powered on, an internal calibration and check sequence is
performed. Upon completion of the check sequence the test set will proceed to the
Main Screen. If
any problem detected with the test set an error message will appear.
E.1
System does not display anything:
1. Check the display for any Initialization.
2. Check the fuse. The fuse is located on the top right of the front panel of the instrument.
E.2
Touch Panel does not work:
Connect a USB mouse to the USB port and control the instrument with it. The instrument will
automatically display a cursor and everything can be done by mouse. Try to recalibrate the touch
panel (Select "Service" in the setup window and enter the service code: 0000# ).
Chia sẻ với bạn bè của bạn: 
