8.6 Setup
The options menu is divided into six subparts which are described in the following sections.
8.6.1. Device settings
"License" Access the License Manager to
see the status or enter licenses to extend
the period.
"About" View information about the CT-T1
like the firmware version, the serial number
(SN) and options.
"Clock" Change the date and time for the
CT-T1.
"Cursor" Switch the cursor style in case you
use a USB mouse.
"Update" Force a firmware update. Usually
the update process is triggered
automatically when you attach a USB key
with a new firmware version.
"Language" Change the language of the
CT-T1.
"Service" Perform system tasks using
service codes.
8.6.2. Operator
For each measurement there is an operator
assigned to. The list of operators can be
edited in this screen.
The active operator can be chosen or a
new one can be added.
90225-1.30 Instruction Manual CT-T1
Page 45 of 62
8.6.3. ACT
The ACT mode uses normalized current /
voltage values to allow standardized
measurements.
"ACT I" for normalized current values.
"ACT U" for normalized voltage values.
8.6.4. Results settings
If some results are not required, they can
be disabled in the results screen. Also ap-
plies to reports.
The turns ratio error is displayed along with
the turns ratio if the rated current for the
corresponding winding is set in the Profile
(see Chapter 8.2 Profile)
90225-1.30 Instruction Manual CT-T1
Page 46 of 62
8.6.5. Printer
Printer settings are changed as depicted.
If the Auto Print Results option is selected,
the results will be printed automatically with
the date and time fields set already.
8.6.6. Colors
Switch between color or black and white
view which is optimized for bright sunlight
usage.
90225-1.30 Instruction Manual CT-T1
Page 47 of 62
Chia sẻ với bạn bè của bạn: |