Multiple Host Situations
Foundry’s 802.1X Port Authentication defaults to one device per port. For installations that are using more than
one host per 802.1X-enabled port, the following commands should be reviewed.
Syntax: [no] dot1x multiple-hosts
Allows multiple hosts on an 802.1X enabled port
Syntax: [no] timeout security-hold-time
Defines the amount of time the port is locked when
multiple hosts are detected on a port configured for only
one host. The default is 60 seconds.
If the multiple-hosts option is used, the port will allow multiple devices to access the network once the first
802.1X client authenticates successfully. When the authenticated client logs off the network and terminates the
authenticated session, the port will deny access to the remaining hosts. Another client must authenticate
successfully to enable the port for multiple-host access again.
NOTE: For more information on MAC Address Locking and 802.1X authentication, refer to the
Foundry Switch
and Router Command Line Interface Reference and the
Foundry Security Guide.
March 2003
©2003 Foundry Networks, Inc.
14
Version 1.0.0
All Rights Reserved.
Chia sẻ với bạn bè của bạn: |