22.1.3. The post supporting the lamp should, except as provided in
22.1.4
, be coloured grey or
black, unless it is of aluminium, concrete or galvanised metal construction, in which case it may
retain its natural colour (S14‑6, General Direction 45(7)). Two white bands must be added, each
band being between 275 and 335 mm in depth, separated by a gap of the same dimensions.
The top white band should be between 275 and 335 mm below the white globe. The two white
bands may be internally illuminated. See illustration of the complete refuge indicator lamp
assembly in
Figure 22-1
.Signs to diagram 610 (S3‑2‑2, see Chapter 3) to indicate which side
drivers should pass may be added.
22.1.4. When a lamp is placed on a street refuge or central reservation at a Zebra or Parallel
crossing and yellow globes are also attached to the same post, the post from ground level up
to the point where the yellow globes are attached must be coloured in alternate black and white
horizontal bands. The lowest band must be black and be between 275 and 1000 mm deep, with
the other bands being not less than 275 nor more than 335 mm deep. Above the point where
the yellow globes are attached, the post should be coloured in accordance with
22.1.3
.
275-335
diameter
275-335
Centre
of globe
Carriageway
275-335
275-335
275-335
3800 min
5000 max
Figure 22-1 Refuge beacon (S14‑1‑29)
85
Chia sẻ với bạn bè của bạn: |
