118 Nguyen Phi Khanh St, Tan Dinh Ward, District 1, Ho Chi Minh City, Vietnam



tải về 28.46 Kb.
Chuyển đổi dữ liệu06.08.2016
Kích28.46 Kb.
#14651




Office: 118 Nguyen Phi Khanh St, Tan Dinh Ward, District 1, Ho Chi Minh City, Vietnam.

Tel: (848) 3 820 6932 Fax: (848) 3 820 2055

Email: contacts@biochem.vn Website: www.biochem.vn

Factory: Lot A-3A-CN, My Phuoc 3 Industrial Zone, Ben Cat, Binh Duong Province.




W8056HGB GLOSS (50%)




PRODUCT INTRODUCTION
Description Rapid Single Component

Water-base Modified Polysiloxane Gloss Top-coat.


Uses Furniture, Flooring and

Paneling made from timber.


Application Spray
COATING PERFORMANCE


  • Self cross-linking, rapid curing

  • Outstanding scrub resistance

  • Outstanding water resistance

  • Excellent adhesion on timber substrates

  • Excellent resistance to UV irradiation

  • Excellent stain resistance

  • Excellent dirt pick-up resistance

  • Outstanding ability to high-light wood-grain pattern (for transparent coating).

  • Excellent fungus resistance.


PHYSICAL AND CHEMICAL PROPERTIES
Specific Gravity at

27 (oC) 1.00 – 1.06 (Clear)

Solid Content (%) 28 – 32 (Clear)

Viscosity ( at 27 oC ) 35 – 45 sec F #4 Cup


Binder Type Modified Polysiloxane


PRODUCT PREPARATION
Mixing Ratio W8056HGB Gloss

100 parts by weight


Reducer

0 to 50 parts by weight


Reducer W8046R Reducer
APPLICATION PARAMETER
Theoretical Coverage

(m2/L) 10 – 16 (subject to substrate porosity).


Coating System 1 or 2 coats of sanding sealer (W8029 / W8348), sanded, followed by 2 to 3 coats of W8056 Gloss.
Application temperature 10 oC - 50 oC
Touch-dry Time (27 oC) 10 – 15 minutes
Hard-dry Time (at 27oC) About 30 minutes.


GENERAL PROPERTIES
W8056HGB Gloss is a water-based rapid single component Modified Polysiloxane Top-coat formulated specially for application on timber substrate via spray application. This product is designed for self cross-linking to provide a rapid curing, hard and durable coating with excellent scrub, UV, stain, water, fungus and dirt pick-up resistance. This product is free of formaldehyde and being water-based, is non-flammable.
W8056HGB Gloss is available in transparent water-clear, transparent stain as well as solid (opaque) colouration.
SHELF LIFE

12 months from date of manufacture. The date refers to product held in its original closed packaging.


STORAGE
Keep containers in a cool ventilated environment, temperature between 5 oC to 40 oC. With partial use, close container tight and use the remainder as soon as possible.


W8056HGB GLOSS (50%)

Advance water-based wood lacquer


FILM PROPERTIES


Property

Results

Touch-dry

10-15 minutes

Hard-dry

About 30 minutes

Adhesion

100 mm2. No Detachment.

Flexibility

2mm Mandrel.

Impact

45cm

Hardness

1 – 2H (Without Part B)

Hardness

2 – 3H (With Part B)

CONTROLLED MATERIALS IN

WET PAINT



Harmful Chemicals

*Level

Aromatic Hydrocarbon

0 mg/kg

Halogenated Compound

0 mg/kg

Formaldehyde

< 0.02%

Mercury

0 mg/kg

Lead

0 mg/kg

Cadmium

0 mg/kg

Chromium

0 mg/kg

Total Volatile Organic Content (TVOC)

 150 g/L

* These chemicals are not used in the manufacture of our product. However, minute traces may be present due to environmental contamination beyond our control.



COMMENT
Tests were performed on paint films applied at 100 wet film and allowed to cure at 27 2oC for 7 days. Relative Humidity was maintained at 80% during the period of film curing.



The information in this brochure has been compiled in accordance to our best knowledge at the date of issue and is based on recent technological and scientific developments.

However, this information should not be construed into recommending the use of our product in violation of any patent or as warranties (express or implied) of non-infringement or its fitness for any particular purpose.

Prospective purchasers are invited to conduct their own tests and studies to determine the fitness Biochem products for their particular purposes and specific applications.



Due to the varying techniques and conditions applied, Biochem accepts no responsibility for any use of the product, may be by way of experiment or manufacture nor does Biochem accepts any responsibility for the used techniques in any application whatsoever. Biochem does not warrant against infringement of patents of third parties by reason of any uses purchasers make of the product.
*Biochem: Biochem International J.S. Company









tải về 28.46 Kb.

Chia sẻ với bạn bè của bạn:




Cơ sở dữ liệu được bảo vệ bởi bản quyền ©hocday.com 2024
được sử dụng cho việc quản lý

    Quê hương